SPICY — Maker Electronics and Circuit Simulation Workbench

No simulation data

SIGNALS

Run a simulation to populate signals.

Plot panes

VERTICAL SCALE

Run a plottable analysis to adjust units per division.

+ increases units/div (zoom out); − decreases units/div (zoom in). Use the mouse wheel over a pane for direct zoom. Double-click a pane to return to Auto.

CURSORS

No cursors set.

MATH TRACE

Supports V(node), I(ref), + − × ÷, abs(), sqrt(), and log10().

Run transient data for FFT

Signal

Run a transient simulation to calculate measurements.

Configure and run a parameter, corner, or Monte Carlo study.

Configure a design space

Run a design exploration to populate the response surface and candidate table.

Import measured CSV data

Import measurement data and map it to a simulated signal.

Run an operating-point, transient, or mixed-signal simulation to calculate power and thermal estimates.

Select a transmission line to inspect termination and transient signal-integrity behavior.

EYE DIAGRAM

Run a transient simulation and choose an eye signal.

Configure and run a bounded reliability campaign.

Define an engineering goal, then analyze the circuit to generate solver-backed hypotheses and experiments.

PROJECT NOTES

ASSUMPTIONS / EVIDENCE

BASELINES

SELECTED RESULT CAPTURES

BASELINE COMPARISON

Baseline A

Baseline B

Create at least two baselines to compare revisions.

CUSTOM DIRECTIVES

Directives are preserved in generated/exported netlists. Only controls explicitly represented by SPICY's solver settings affect the internal runtime.

MODEL / SUBCIRCUIT LIBRARIES

CONVERGENCE / SOLVER

RAW EXPORT

No raw netlist validation has been run.