— Field Instrument 064

Spectrum

A WebSDR Studio —
Connection
Standby
No device
AGCMedium
AF Gain50%
SquelchOpen
VolumeMuted
U.S. ARMY SIGNAL CORPS
Realtime Spectrum Zoom 1x   Span: --   RBW: --
14.265.000 MHz
------
Frequency
14.265.000 MHz
Step:
Band
Memory Channels
#FrequencyBandModeLabel

Radio

Demodulator and front-end control. Changes apply live to the running receiver.

Demodulator

Front End

Notes

Sample rate and PPM take effect on the next connect for USB hardware. The simulator applies them immediately. Direct sampling routes the ADC straight to the antenna for HF reception without an upconverter; Q branch matches the common dongle modification, and the meaningful range is 0 to 14.4 MHz. Stock dongles without the direct sampling mod will hear HF only weakly.

Signals

Strongest carriers detected in the current span, refreshed once per second. Click a row to tune.

FrequencyLevel (dBFS)OffsetΔ vs noise

Measurements at tuned frequency

Waiting for signal...

Decode

Morse (CW) decoder. Tune a CW signal in CW mode, set the threshold, and copied text appears below. RTTY and FT8 are on the roadmap.

No copy yet.

RF Lab

Raw IQ constellation straight from the source, plus analyzer settings.

IQ Constellation

Analyzer

Recordings

IQ capture writes a 2-channel 16-bit WAV (I left, Q right), the format SDR# and friends exchange. Audio capture records the demodulated output at line level, unaffected by the volume knob. Recordings live in memory until downloaded; 10 seconds of IQ at 2.4 MS/s is roughly 96 MB.

Idle.
Idle.

Replay

Feed a recorded IQ WAV back through the whole receiver: spectrum, waterfall, demodulators, decoder. Loops until stopped. If the filename carries an SDR-style frequency tag (..._14265000Hz_...) the dial follows it.

Journal

Log what you hear. Entries capture the tuned frequency and mode automatically and live in this browser (localStorage) until you export them.

UTCFrequencyModeEntry

Geospatial

Station position, Maidenhead grid, and great-circle bearing to a target grid. Position is stored locally and shown in the status bar.

Grid square: --

Bearing to target

Enter a target grid.

System

Self Test

Browser-runnable test harness. All lamps must be green before a release ships.

Not yet run.

Commissioning

First hardware session, SHAKEDOWN style. Run the steps in order with a dongle connected and a known reference on the air (WWV on 10.000.000, a local NOAA transmitter, or a signal generator). The simulator works as a dry run and results are marked as such.

Not commissioned.
No steps run yet.

Data

Feedback

Field reports make the instrument better. The report carries version, source, tuned frequency, mode, theme, and browser alongside your note.

Environment

Debug