Equipment is shared with the rest of the SHAKEDOWN project. Adding here is the same as adding in WITNESS, INTERLOCK, or any other module.
Picking a preset fills units, tolerance, and reference method with sensible defaults. You can still edit them after.
How often this sensor should be re-verified per the Cx plan. Determines due-date status on the inventory list and the Calibration Schedule report.
Leave blank if no correction was needed. Otherwise enter the post-correction BAS reading.
Create a deficiency issue in WARRANT for this sensor. Useful when a sensor consistently fails to calibrate within tolerance or needs replacement.
Use Medium for sensors that need calibration adjustments and High for sensors that need replacement or are causing energy waste / comfort failure.